DC Motors
High voltage permanent magnet DC motors are typically used with an SCR (thyristor) controller in applications requiring adjustable speed and constant torque throughout the speed range. They are also widely used in applications requiring dynamic braking or adjustable speed/reversing capabilities.
Mechanical Features:
Low profile space-saving design. Unique brush holder design provides easy access to brushes and integral constant pressure brush/spring assembly for servicing. Large oversized brushes assure longer brush life. Heavy-duty, stamped steel, bolt-on base (removable). NEMA C face mounting at no additional cost. Rugged die cast aluminum endshields with cast iron bearing inserts. Permanently lubricated sealed ball bearings. May be converted NEMA 48 base and/or C face using modification kits noted below.
Electrical Features:
Input power of 115 or 230 volts rectified AC when used with an appropriate SCR control. Linear speed/torque characteristics over entire speed range. High starting torque for heavy load applications. Capable of dynamic braking for faster stops. Reversible rotation with simple two-lead connection. For further information on Direct Current Motors, request Bulletin 1600.
Catalog No: | 108092.00 | Model No: | C4D17FK10 |
Horsepower: | 1.5 | RPM: | 1750 |
Phase: | 1 | Volts: | 180 |
Hertz: | Rotation: | Reconnectable | |
Frame: | 56C | Mounting: | C-Face Rigid |
Overload: | Not Protected | Enclosure: | TEFC |
Shaft Diameter: | 5/8 In. | Bearing: | Ball Bearing |
Duty: | Continuous | Motor Weight: | 56 lbs. |
Service Factor: | 1.0 | Efficiency: | 86.5% |
Max Ambient Temp: | 40 Degrees C | Full Load Amps: | 7.6 |